Cambelt International Corporation
Rubber Conveyor Belt Systems
The Cambelt difference is in our “fully molded” design and construction. We carefully load high quality, uncured, raw rubber and base “belt ply” materials into our CNC machined belt molds prior to the chemical vulcanizing and pressing processes. The belt comes from the belt mold in the exact configuration that you intend to use it in.
It can’t fall apart into separate pieces because it was never glued together from pre-cured pieces in the first place.
Available Belt Compounds:
- General Purpose (Black)
- Oil & Fat Resistant (Black)
- Heat Resistant (Black)
- Flame Retardant (Black)
- MSHA Approved (Black)
- Conductive (Black)
- Standard (White)
- Oil & Fat Resistant (White)
Conveyor Belting Specs
| Cambelt product | CamWall™ | CamFlex™ | Trough | Straight cleat | Chevron cleat |
| Sidewall height | 3″, 4.5″, 6″ | 3″, 4.5″, 6″ | N/A | N/A | N/A |
| Cleat style | High cross cleats Buckets (opt) |
High nubs | N/A | Low cross cleats | Low chevron cleats |
| Incline options | Up to 90° | Up to 45° | Up to 25° | Up to 25° | Up to 25° |
| Bulk material particle sizes |
Powders to large lumps |
Powders to moderate lumps |
Powders to large lumps |
Powders to moderate lumps |
Powders to moderate lumps |
| Load capacity | High | Highest | Medium | Low | Low |
| Belt speed | Low | High | Medium | Medium | Medium |
| Advantages | •Works at any angle •High capacity •Prevents caking |
•Moderate angles •Very high capacity •Prevents caking |
•High capacity •Low cost |
•Low cost •Shallow angles |
•Low cost •Shallow angles |